CARBURETOR SET UPS

_____________________________________________________________

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that’s “tuned” for peak torque around 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Look for the Performer EPS to “up the standards” in dual-plane intake manifold design. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains.

_______________________________________________________________

Performer Air Gap

Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. No provision for exhaust heated chokes or exhaust crossover. For spread-bore or square-bore carburetors without adapter. Will not fit under stock Corvette hood. Available with standard finish or polished.

_______________________________

Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that’s used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks. For square-bore carburetors only. No provision for exhaust-heated chokes and no exhaust crossover. Not for 1987 and later cast iron heads and will not fit under stock Corvette hood. Available with standard finish or polished.

________________________________________

350 Chevy 9.5:1 Engines 1500 to 6500 rpm

420 horsepower and 415 ft/lbs. of torque

The Edelbrock Performer RPM Package

Flat-top pistons 9.5:1 CR

Performer RPM 170cc intake aluminum heads 70cc chamber

Performer RPM cam 234/244 @ .050" .488"/.510"

Performer RPM manifold

Performer RPM carb 750cfm

Headers 1 3/4"

_____________________________________

350 Chevy 9.5:1 Engines 1500 to 6500 rpm

410 horsepower and 408 ft/lbs. of torque

The Edelbrock Performer RPM Package

Flat-top pistons 9.5:1 CR

Performer RPM 170cc intake aluminum heads 70cc chamber

Performer RPM cam 234/238 @ .050" .448"/.510"

Performer RPM manifold

Edelbrock Q-Jet carb or Performer Series 800 cfm carb with electric choke.

_______________________________________________________________

350 Chevy 9.0:1 Engine idle to 5500 rpm

320 horsepower and 382 ft/lbs. of torque

The Edelbrock Performer Package.

Performer 64cc aluminum heads

Performer cam 204/214 @ .050" .420"/.443

Performer manifold

Performer Series 600 cfm carb

______________________________________________________________

350 Chevy 8.5:1 Engine idle to 5500 rpm

310 horsepower and 375 ft/lbs. of torque

The Edelbrock Performer Package.

Performer 70cc aluminum heads

Performer cam 204/214 @ .050" .420"/.443

Performer manifold EGR C.A.R.B.-approved

Performer Series 600 cfm carb C.A.R.B.-approved

_______________________________________________________________

Performer RPM E-Tec 9.5:1 Engine1500 to 6500 rpm.

435 horsepower and 435 ft/lbs. of torque Carb

RPM TORQUE HORSEPOWER

2500          360                 160
3000            370                 210
3500            368                 250
4000            430                 335
4500            435                 370
5000            428                 408
5500            410                 435
6000            375                 435
6500            350                 430

Edel Perf RPM Hydraulic Roller camshaft 234/238 @ .050" .539/.548"

170cc Vortec-shaped intake and 70cc exhaust ports 64cc combustion chamber

Performer RPM Air-Gap #7516 manifold

Performer Series 800 cfm carburetor #1413

440 horsepower and 425 ft/lbs. of torque EFI

Edelbrock Pro-Flo EFI Systems

_________________________________________________________________________

400 Chevy 9:1 Engine idle to 5500 rpm

390 ft/lbs. torque

The Edelbrock Performer Package.

Performer cam 204/214 @ .050" .420"/.443

Performer manifold